Beş Sıra, Kaya Sertliği F6 - F18 için Sıkıcı Kesiciler Sert Alaşımlı Malzemeyi Kaldırdı

Model: CYHT (1)
Teslimat: FOB
Minimum sipariş miktarı: 1 Parça
Tedarik kapasitesi: 300 Parça / ay
Orijinal kaynak: Çin
Stoklama Dönemi: 30 gün

Miktar:

Ürün Açıklaması

Detaylı Ürün Açıklaması

Özellikleri:	F6-F18'in Kaya Sertliği İçin	Kategori:	Raiseboring Makine Makaralı Kesici
Kürek çekmek:	Beş	Malzeme:	Yüksek Kaliteli Çelik Ve Sert Alaşım

Beş Rows Long Service Life Raise Borer Machine Roller Cutter For Rock Hardness of F6-F18

Giriş

In our factory, there are two kinds 5 rows cutter, one is our M type and another is our H type. In order to make each cuuter last longer, we used high quality steel and high quality hard alloy when manufacturing it. For rocks with different crushing properties (from the rock hardness of F6 to the rock hardness of F18), they all work well and achieve good results. We use the same cutter throughout the process. As a result, the phenomenon of incorrectly trimming the head is almost gone, and there is no need to go to stock so many different types of tools.

Özellikleri

1. Biz iki tür kesiciler sağlayabilir, M ve H Farklı kırılma özellikleri ve sertlik ile çeşitli jeolojik koşullar ile kayalar için F6 - F18 Prusya katsayısı, bizim ocaklar ihtiyaçlarınızı çok iyi karşılayabilir. Buna ek olarak, kullanıcıların jeolojik özelliklerine göre, size uygun ocak konfigürasyonu sağlayabiliriz, böylece yüksek maliyet performansına sahip ürünler satın alabilirsiniz.
2. Previously, some cutter sets were installed by welding, which may lead to defects such as low repetitive positioning accuracy and long replacement cycle. However, our cutter sets were installed by high-strength screw and positioning pin keys, which can effectively avoid these defects.
3. The connection between cutter and cutter saddle is patented structure. The V-groove and oblique anti-loosening bolt can effectively avoid the cutter jump caused by rock-breaking vibration and double the service life of cutter base and cutter.
4. The special design of alloy tooth profile can improve its ability to hard rock, while maintaining sufficient strength and life.
5. The optimum installation angle of cutter and cutter saddle can avoid the early wear of cutter base and cutter body and keep good rock-breaking performance of alloy teeth throughout their life.