Español
Pусский
Français
Türk dili
Detailed Product Description
Category: | Raise Boring Rig | Max Diameter: | 4.5m |
|---|---|---|---|
Max Depth: | 200m | Motor Power: | 132Kw |
Feed Force: | 2000KN | Feed Distance: | 1455mm |
RCS Intelligent System Raise Boring Machine with Famous Key Components
Introduction:
The development of CY-R series Raise boring rig has absorbed the advanced design concept of similar foreign products. It is a kind of intelligent lifting drill with hard rock operation ability, high operation efficiency, safe and reliable, easy to operate. It is the necessary digital equipment for safe excavation of underground mines.
Manin parameters:
Nominal raise diameter | 3000 (MM) | Feed velocity | 7.0 (M/min) |
Max raise diameter | 3500 (MM) | Feed distance | 1455 (MM) |
2nd raise diameter | 4500 (MM) | Clockwise torque | 172 (KN.m) |
Max raise depth | 200 (M) | Anticlockwise torque | 197 (KN.m) |
Pilot hole | 280 (MM) | Rotation velocity | 0-37 (R/min) |
Drill angel horizontal | 60-90 (°) | Voltage | 380 (V) |
Feed force | 2000 (KN) | Motor power | 132 (KW) |
Lifting force | 2000 (KN) | Motor rotation speed | 1480 (R/min) |
Dimension:
Features:
1: Our raise boring machine use famous key components:
Main Pump --- Germany Bosth Rexroth
Valve --- Germany Hawe
Rotary motor --- France Poclain
Hose & joint --- America Park
Seal --- Germany FAT
Bearing --- Sweden SKF
Control system --- China Sany
Remote system --- China Sany
Electrical control --- Sweden ABB
2: Our raise boring machine using RCS intelligent control system
Security protection | Wrong operation |
Abnormal working condition | |
Status alert | |
Fault diagnosis | |
Automatic operation | Parameter optimization |
Dual - mode operation | |
Automatic location | |
Dynamic board | |
Multimode operation | Wireless remote control |
Remote control | |
Manual operation | |
Virtual color display |
3:The construction case of our raise boring machine:
1: Two units R120 Standrad Raise Boring Machine
Ground Condition: Complicated ground condition, magnetite mine, Protodikonov's Hardness f12～f18.
Instruction: 108m chute hole (draw shaft) has been finished (3m diameter, 11 holes), 240m ventilation shaft(1.5m diameter, 1 hole). The highest efficiency is 18m per shift. For example, NO.27 hole, 104m depth, hardness f14, pilot drilling speed is 1m/h. The average drilling depth is 8.1m per shift. Max. Drilling depth is 11.2m per shift.
2: One unit R120 Standard Mobile Raise Boring Machine
Ground Condition:Complicated ground condition, Copper mine, Protodikonov's Hardness f 8~f14.
Instruction:They used one raise boring machine from other manufacturer. The rock mixed with massive mud, shrinking happened during drilling and raising. So its torque was low and then low efficiency, more failures, difficult to transportation and high cost. When they use our RBM, here is no similar problems. The efficiency is above 10m per shift which is twice than before and it saves half of cost and one thirds time for transportation.
Send Message
Related Products
